/*
* This file is part of VECTO.
*
* Copyright © 2012-2019 European Union
*
* Developed by Graz University of Technology,
*              Institute of Internal Combustion Engines and Thermodynamics,
*              Institute of Technical Informatics
*
* VECTO is licensed under the EUPL, Version 1.1 or - as soon they will be approved
* by the European Commission - subsequent versions of the EUPL (the "Licence");
* You may not use VECTO except in compliance with the Licence.
* You may obtain a copy of the Licence at:
*
* https://joinup.ec.europa.eu/community/eupl/og_page/eupl
*
* Unless required by applicable law or agreed to in writing, VECTO
* distributed under the Licence is distributed on an "AS IS" basis,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the Licence for the specific language governing permissions and
* limitations under the Licence.
*
* Authors:
*   Stefan Hausberger, hausberger@ivt.tugraz.at, IVT, Graz University of Technology
*   Christian Kreiner, christian.kreiner@tugraz.at, ITI, Graz University of Technology
*   Michael Krisper, michael.krisper@tugraz.at, ITI, Graz University of Technology
*   Raphael Luz, luz@ivt.tugraz.at, IVT, Graz University of Technology
*   Markus Quaritsch, markus.quaritsch@tugraz.at, IVT, Graz University of Technology
*   Martin Rexeis, rexeis@ivt.tugraz.at, IVT, Graz University of Technology
*/

using System.Reflection;
using System.Runtime.InteropServices;

// General Information about an assembly is controlled through the following 
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("VectoHashingTest")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("VectoHashingTest")]
[assembly: AssemblyCopyright("Copyright ©  2017")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]

// Setting ComVisible to false makes the types in this assembly not visible 
// to COM components.  If you need to access a type in this assembly from 
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(false)]

// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("bd51185f-fccf-42e3-b3e1-c59fcd74134a")]

// Version information for an assembly consists of the following four values:
//
//      Major Version
//      Minor Version 
//      Build Number
//      Revision
//
// You can specify all the values or you can default the Build and Revision Numbers 
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.0.0.0")]
[assembly: AssemblyFileVersion("1.0.0.0")]