vecto multistep tool: abort simulation in case an exception occurs during creation of simulation runs, fix dialog helper to allow showing error message dialog

adding result status as enum, adapt parsing of VIF results to handle ignored simulation runs; check for ignored simulation run and throw error

fix #274: remove EngineIdlespeedDownshift factor from conventionals

See merge request vecto/vecto!146

calculation of continuous power loss in case the continuous torque is 0 (or very low)

See merge request vecto/vecto!145

updating changelog

See merge request vecto/vecto!143

IEPC: calculate rated power from full load curve

See merge request vecto/vecto!142

# Conflicts:
#	VectoCore/VectoCore/OutputData/SumDataFields.cs

multiply continuous power by 2 in case of wheel hub motor with only one side measured

adding mock input data for battery electric vehicle (needed to calculate...

See merge request vecto/vecto!139

# Conflicts:
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeed.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedAux.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedAux_MeasuredSpeedAux.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGear.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAT-PS.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAT-PS_MeasuredSpeedGear_AT-PS.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAT-Ser.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAT-Ser_MeasuredSpeedGear_AT-Ser.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAux.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearAux_MeasuredSpeed_Gear_Rural_Aux.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearVair.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearVairAux.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearVairAux_MeasuredSpeed_Gear_Rural_VairAux.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGearVair_MeasuredSpeed_Gear_Rural_Vair.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGear_MeasuredSpeed_Gear_Rural.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGear_TractionInterruption.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedGear_TractionInterruption_MeasuredSpeed_Gear_Rural_TractionInterruption.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVair.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairAux.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairAux_MeasuredSpeedVairAux.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairBack.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairBack_MeasuredSpeedVairBack.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairFront.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairFront_MeasuredSpeedVairFront.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairNoWind.vsum
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVairNoWind_MeasuredSpeedVairNoWind.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeedVair_MeasuredSpeedVair.vmod
#	VectoCore/VectoCoreTest/TestData/MeasuredSpeed/Results/MeasuredSpeed_MeasuredSpeed.vmod

fix #266: unavailable velocity drop data

See merge request vecto/vecto!138

consider twin tyres when calculating average RRC of motor vehicle

See merge request vecto/vecto!132

double the IEPC power reported in the CIF in case of IEPC wheel hub motors with only one side measured.

See merge request vecto/vecto!137

Problem 1: The measured speed cycle uses velocity data from preprocessing
to determine driver action. These data are not always available,
e.g. for certain shift strategies.

Solution: Check for availability of velocity drop data. If not available
then set driver action to accelerate.

Problem 2: The failing tests were checking the vmod & vsum files
produced against existing ones. The columns of vmod & vsum have changed
(vmod: added driving action, vsum: analytic gear ratio %).

Solution: Replaced existing vmod & vsum files with the ones that are
noew created by the tests.

fix #189: reconsider inertia for smaller engines

See merge request vecto/vecto!133

Problem: High engine inertia, compared to vehicle total mass, causes
simulation to fail during gear shifts for many medium lorries.

Solution: Different way of calculating inertia based on engine
displacement and gearbox type.

regression update: consider ADC ratio for EM contribution to max propulsion torque

See merge request vecto/vecto!134

super cap standard values correction

See merge request vecto/vecto!135

Disengage Gearbox when braking to stand still for P1 hybrids

See merge request vecto/vecto!136