add type information to enum instantiation

VectoCore/Models/SimulationComponent/Data/ModalResult.cs

 using System;
 using System.Data;
+using System.Reflection;
 
 namespace TUGraz.VectoCore.Models.SimulationComponent.Data
 {
@@ -17,49 +18,69 @@ namespace TUGraz.VectoCore.Models.SimulationComponent.Data
     /// </summary>
     public enum ModalResult
     {
-        time,			//	[s]	    Time step.
-        dist,			//	[km]	Travelled distance.
-        v_act,			//	[km/h]	Actual vehicle speed.
-        v_targ,			//	[km/h]	Target vehicle speed.
-        acc,			//	[m/s2]	Vehicle acceleration.
-        grad,			//	[%]	    Road gradient.
-        n,			    //	[1/min]	Engine speed.
-        Tq_eng,			//	[Nm]	Engine torque.
-        Tq_clutch,		//	[Nm]	Torque at clutch (before clutch, engine-side)
-        Tq_full,		//	[Nm]	Full load torque
-        Tq_drag,		//	[Nm]	Motoring torque
-        Pe_eng,			//	[kW]	Engine power.
-        Pe_full,		//	[kW]	Engine full load power.
-        Pe_drag,		//	[kW]	Engine drag power.
-        Pe_clutch,		//	[kW]	Engine power at clutch (equals Pe minus loss due to rotational inertia Pa Eng).
-        Gear,			//	[-]	    Gear. "0" = clutch opened / neutral. "0.5" = lock-up clutch is open (AT with torque converter only, see Gearbox)
-        PlossGB,		//	[kW]	Gearbox losses.
-        PlossDiff,		//	[kW]	Losses in differential / axle transmission.
-        PlossRetarder,	//	[kW]	Retarder losses.
-        PaEng,			//	[kW]	Rotational acceleration power: Engine.
-        PaGB,			//	[kW]	Rotational acceleration power: Gearbox.
-        PaVeh,			//	[kW]	Vehicle acceleration power.
-        Proll,			//	[kW]	Rolling resistance power demand.
-        Pair,			//	[kW]	Air resistance power demand.
-        Pgrad,			//	[kW]	Power demand due to road gradient.
-        Paux,			//	[kW]	Total auxiliary power demand .
-        Pwheel,			//	[kW]	Total power demand at wheel = sum of rolling, air, acceleration and road gradient resistance.
-        Pbrake,			//	[kW]	Brake power. Drag power is included in Pe.
-        Paux_xxx,		//	[kW]	Power demand of Auxiliary with ID xxx. See also Aux Dialog and Driving Cycle.
-        FC,			    //	[g/h]	Fuel consumption from FC map..
-        FC_AUXc,		//	[g/h]	Fuel consumption after Auxiliary-Start/Stop Correction. (Based on FC.)
-        FC_WHTCc,		//	[g/h]	Fuel consumption after WHTC Correction. (Based on FC-AUXc.)
-        TCν,			//	[-]	    Torque converter speed ratio
-        TCmu,			//	[-]	    Torque converter torque ratio
-        TC_M_Out,		//	[Nm]	Torque converter output torque
-        TC_n_Out,		//	[1/min]	Torque converter output speed
+        [ModalResultFieldAttr(typeof(double))] time,			//	[s]	    Time step.
+        [ModalResultFieldAttr(typeof(double))] dist,			//	[km]	Travelled distance.
+        [ModalResultFieldAttr(typeof(double))] v_act,			//	[km/h]	Actual vehicle speed.
+		[ModalResultFieldAttr(typeof(double))] v_targ,			//	[km/h]	Target vehicle speed.
+		[ModalResultFieldAttr(typeof(double))] acc,				//	[m/s2]	Vehicle acceleration.
+        [ModalResultFieldAttr(typeof(double))] grad,			//	[%]	    Road gradient.
+		[ModalResultFieldAttr(typeof(double))] n,			    //	[1/min]	Engine speed.
+		[ModalResultFieldAttr(typeof(double))] Tq_eng,			//	[Nm]	Engine torque.
+		[ModalResultFieldAttr(typeof(double))] Tq_clutch,		//	[Nm]	Torque at clutch (before clutch, engine-side)
+		[ModalResultFieldAttr(typeof(double))] Tq_full,			//	[Nm]	Full load torque
+		[ModalResultFieldAttr(typeof(double))] Tq_drag,			//	[Nm]	Motoring torque
+		[ModalResultFieldAttr(typeof(double))] Pe_eng,			//	[kW]	Engine power.
+		[ModalResultFieldAttr(typeof(double))] Pe_full,			//	[kW]	Engine full load power.
+		[ModalResultFieldAttr(typeof(double))] Pe_drag,			//	[kW]	Engine drag power.
+		[ModalResultFieldAttr(typeof(double))] Pe_clutch,		//	[kW]	Engine power at clutch (equals Pe minus loss due to rotational inertia Pa Eng).
+		[ModalResultFieldAttr(typeof(double))] Gear,			//	[-]	    Gear. "0" = clutch opened / neutral. "0.5" = lock-up clutch is open (AT with torque converter only, see Gearbox)
+		[ModalResultFieldAttr(typeof(double))] PlossGB,			//	[kW]	Gearbox losses.
+		[ModalResultFieldAttr(typeof(double))] PlossDiff,		//	[kW]	Losses in differential / axle transmission.
+		[ModalResultFieldAttr(typeof(double))] PlossRetarder,	//	[kW]	Retarder losses.
+		[ModalResultFieldAttr(typeof(double))] PaEng,			//	[kW]	Rotational acceleration power: Engine.
+		[ModalResultFieldAttr(typeof(double))] PaGB,			//	[kW]	Rotational acceleration power: Gearbox.
+		[ModalResultFieldAttr(typeof(double))] PaVeh,			//	[kW]	Vehicle acceleration power.
+		[ModalResultFieldAttr(typeof(double))] Proll,			//	[kW]	Rolling resistance power demand.
+		[ModalResultFieldAttr(typeof(double))] Pair,			//	[kW]	Air resistance power demand.
+		[ModalResultFieldAttr(typeof(double))] Pgrad,			//	[kW]	Power demand due to road gradient.
+		[ModalResultFieldAttr(typeof(double))] Paux,			//	[kW]	Total auxiliary power demand .
+		[ModalResultFieldAttr(typeof(double))] Pwheel,			//	[kW]	Total power demand at wheel = sum of rolling, air, acceleration and road gradient resistance.
+		[ModalResultFieldAttr(typeof(double))] Pbrake,			//	[kW]	Brake power. Drag power is included in Pe.
+		[ModalResultFieldAttr(typeof(double))] Paux_xxx,		//	[kW]	Power demand of Auxiliary with ID xxx. See also Aux Dialog and Driving Cycle.
+		[ModalResultFieldAttr(typeof(double))] FC,			    //	[g/h]	Fuel consumption from FC map..
+		[ModalResultFieldAttr(typeof(double))] FC_AUXc,			//	[g/h]	Fuel consumption after Auxiliary-Start/Stop Correction. (Based on FC.)
+		[ModalResultFieldAttr(typeof(double))] FC_WHTCc,		//	[g/h]	Fuel consumption after WHTC Correction. (Based on FC-AUXc.)
+		[ModalResultFieldAttr(typeof(double))] TCν,				//	[-]	    Torque converter speed ratio
+		[ModalResultFieldAttr(typeof(double))] TCmu,			//	[-]	    Torque converter torque ratio
+		[ModalResultFieldAttr(typeof(double))] TC_M_Out,		//	[Nm]	Torque converter output torque
+		[ModalResultFieldAttr(typeof(double))] TC_n_Out,		//	[1/min]	Torque converter output speed
     }
 
+	[AttributeUsage(AttributeTargets.Field, AllowMultiple = false, Inherited = true)]
+	class ModalResultFieldAttr : Attribute
+	{
+		internal ModalResultFieldAttr(Type fieldType)
+		{
+			this.FieldType = fieldType;
+		}
+		public Type FieldType { get; private set; }
+	}
+
     public static class ModalResultFieldExtensions
     {
         public static Type GetDataType(this ModalResult field)
         {
             return typeof(double);
         }
+
+	    private static ModalResultFieldAttr GetAttr(ModalResult field)
+	    {
+		    return (ModalResultFieldAttr)Attribute.GetCustomAttribute(ForValue(field), typeof (ModalResultFieldAttr));
+	    }
+
+	    private static MemberInfo ForValue(ModalResult field)
+	    {
+		    return typeof (ModalResult).GetField(Enum.GetName(typeof (ModalResult), field));
+	    }
     }
 }