Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:feature/VECTO-1652-update_wheesl.csv to develop

* commit '4376f07c':
  additional parameter in callback

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:feature/VECTO-1652-update_wheesl.csv to develop

* commit '158d9887':
  extending xml validator callback and pass on custom error message
  adapt hashing test for changes in hashing method
  XMLValidator: check tyre dimension when validating wheels
  cherry pick aa6d2d5f
  correcting typo
  cherry pick 00821ea1
  cherry pick 691f8f27
  adding new tyre dimensions (copy wheels.csv from official version)

updating xml schema version 2.5: remove restrictions for tyre dimension
adding xml reader for tyre in version 2.5
adding testcase to read vehicle with 2.5 tyres
adding tyre xml version 2.5

(cherry picked from commit ba6a0600)

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1670-simulation-run-aborted to develop

* commit '986b0d46':
  bugfix boosting limits with APT transmissions

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:feature/VECTO-1648-BusAux-adaptations to develop

* commit '2e86e615': (49 commits)
  move mod-data postprocessing (PEV, HEV-S, HEV-P)  to separate files refactor bus aux heating: return heating demand for all heating sources add testcases for mod-data postprocessing and FC-correction of busaux heating
  - refactoring SSM UnitTest - adding testcase for post-processing correction of heating demand
  make project compile again
  fix: no negative heating demand allowed - that-s cooling...
  updating testcases for SSM cooling and heating
  fix: setting bus dimensions for the case heating differently, the whole bus needs to be heated, considering the part for the driver compartment accordingly
  additional testcases for heating power demand of different technologies
  refactoring heating power calculation for different technologies
  adding several more testcases for SSM calculations, calculating cooling power
  bugfix: consider venitlation power even no heating is necessary or possible (introduced when refactoring the CoP per environment)
  use separate SSM config for cooling and heating (different system configuration, different heatpumps) extend IACSystem with max values for heating, length of passenger and driver compartment to split heating/cooling demand adding testcases for different HVAC configurations, expected electric and mechanic power, depending on heatpump technologies for heating and cooling
  update repo
  correcting mapping of hvac configurations
  disable heat pump as tech benefit
  BusAux: use separate HVAC Configuration for heating and cooling extend environmental map with efficiency for heater and heatpump cop depending on environmental conditions map HVAC system configuration and heatpump types (driver/passenger) to a HVAC configuration for calculations segment table: separate busaux HVAC configuration for heating and cooling depending on powertrain architecture (conv, HEV, PEV)
  adding different cases of heating for buses adding distribution of heating power depending on auxiliary configuration (heatpump, electric heater, fuel heater) for all environmental conditions adding testcase for heating cases and heating power distribution
  use Interfaces instead of concrete types for ElectricMotorTorqueLimits
  added voltage level check in electric machine data adapter
  added HybridStrategyParameterDataAdapter, BatteryDataAdapter, ElectricMachinesDataAdapter
  use same names for internal resistance data table columns as in engineering mode
  ...

# Conflicts:
#	VectoCore/VectoCore/InputData/Reader/DataObjectAdapter/AbstractSimulationDataAdapter.cs
#	VectoCore/VectoCore/InputData/Reader/DataObjectAdapter/DeclarationDataAdapterHeavyLorry.cs
#	VectoCore/VectoCore/InputData/Reader/DataObjectAdapter/DeclarationDataAdapterSingleBus.cs
#	VectoCore/VectoCore/InputData/Reader/Impl/DeclarationModeCompletedMultistageBusVectoRunDataFactory.cs
#	VectoCore/VectoCore/Models/SimulationComponent/Data/Battery/BatteryData.cs
#	VectoCore/VectoCore/OutputData/IModalDataContainer.cs
#	VectoCore/VectoCore/OutputData/ModalDataPostprocessingCorrection.cs
#	VectoCore/VectoCore/OutputData/SummaryDataContainer.cs
#	VectoCore/VectoCoreTest/TestData/Integration/Buses/FactorMethod/CompletedBus_41-32b.vecto
#	VectoCore/VectoCoreTest/TestData/Integration/Buses/FactorMethod/primary_heavyBus group41.RSLT_VIF.xml
#	VectoCore/VectoCoreTest/TestData/Integration/Buses/FactorMethod/primary_heavyBus group42_SmartPS.RSLT_VIF.xml

refactor bus aux heating: return heating demand for all heating sources
add testcases for mod-data postprocessing and FC-correction of busaux heating

Harald Martini authored 2 years ago and Markus Quaritsch committed 2 years ago

Merge in VECTO/vecto-dev from VECTO/hm_vecto-dev:feature/VECTO-1503-new-vecto-report-xml-schema to develop

* commit 'e97b2ed8':
  impemented VehicleType in data providers for primary buses
  updated schemaset in MRF Testcases
  updated NInject
  updated validate and print in testcases to ensure printing of the report if an error occured
  implemented VehicleType in HeavyLorryVehicleDataProvider
  added VehicleType to primary buses

- adding testcase for post-processing correction of heating demand

fix: setting bus dimensions for the case heating differently, the whole bus needs to be heated, considering the part for the driver compartment accordingly

Harald Martini authored 2 years ago and Markus Quaritsch committed 2 years ago

Merge in VECTO/vecto-dev from VECTO/hm_vecto-dev:feature/VECTO-1500-multistep-user-manual to develop

* commit 'e978c96d':
  updated dockerfile for multistep user manual
  added output file
  added addtional images
  added powerpoint presentation containing the images used in the documentation
  extended multistep documentation (added airdrag chapter, new step input chapter, added more details in other chapters)
  updated header
  use different docker image with older pandoc version
  Added multistep tool documentation (WIP)
  Added Docker file and scripts to build documentation html using docker

bugfix: consider venitlation power even no heating is necessary or possible (introduced when refactoring the CoP per environment)

use separate SSM config for cooling and heating (different system configuration, different heatpumps)
extend IACSystem with max values for heating, length of passenger and driver compartment to split heating/cooling demand
adding testcases for different HVAC configurations, expected electric and mechanic power, depending on heatpump technologies for heating and cooling

Stefanos DOUMPOULAKIS authored 2 years ago and Markus Quaritsch committed 2 years ago

Merge in VECTO/vecto-dev from Time-based-driving-cycles-BEV to develop

* commit '650dd571': (36 commits)
  a)corrected release notes, b)bugfix for engineOnly builder
  a)Padd_electric=0 for all test jobs, b)restored GenericVehicles, c)minor fixes
  a)minor fixes, b)engineering comments
  a)updated documentation, b)GenericVehicles E2 has timerun cycles
  updated user manual and release notes
  recreated vdris, updated test results
  a)added distance-run tests for IEPC, b)updated distance-run results
  resolved rebase issues
  bugfix: initialization of MeasuredSpeedCycle.DriverBehavior
  bugfix: CycleGearbox don't create torqueConverter for APTN
  a)fixes in powertrains, b)added timerun for IEPC, c)removed idealBattery
  updated vdris and test results
  updated distance.vsum for E2
  refactored PowertrainBuilder
  added custom CycleGearbox for BEVs
  a)renamed testdata folders, b)bugfix: roll during gearshift for PWheel E2
  a)removed vehicle speed from vdris, b)recreated E2 vdris
  bugfixes, improved perfomance for PWheel E3, E4
  improved and refactored PWheelCycle
  refactoring Powertrains - part II
  ...