* Added Developer Guide (including picture source)

* Implemented engine-side TC inertia input parameter in GBX file
* Updated User Manual for TC inertia
* Relabeled "OK" buttons to "Save" in input file editors

* Fixed small TC issue

* AT/TC Update
+ Various smaller fixes

* Updated .vsum(.json)
** Added l/100km and CO2 results. (Fixed VECTO-33)
** Added FC-Final.
** Added Loading. (json)
** Added missing fuel parameters. (json)
* Updated README.md

* Updated Segment Table header
* Fixed Eco Roll (VECTO-30)
* Fixed Cycles in VECTO Editor being overwritten in Engineering Mode (VECTO-31)

readme: Update Release-checklist
BUG: Minor, sample Coach-file fails: Generic Vehicles\Engineering Mode\24t Coach\24t Coach.vecto

* Updated CSV file format. Now only one header with units included.
* Changed input file comment symbol form "c" to "#".
* Replaced old Demo/Default Data with "Demo Vehicles"
* Updated User Manual

* Removed pre-header from .vmod and .vsum files
* Updated Graph  for new .vmod format

* Mission profiles are shown in VECTO Editor in Declaration Mode
* Removed "Extrapolation not possible!" exceptions in cDelaunayMap for faster debugging
* Better Cd * A handling in GUI and input file

* Added EUPL headers to new source files
* Updated Declaration folder
* Moved GUI/report source files to new folder (outside Declaration folder)
* Fixed opening .vmod files in Graph from Message list

* Added pdf report output
* Added charts in files editors
* Added declaration mode features
* Removed GRAPHi calls
* Added visualizer for modal results (replaces GRAPHi)(open)
* Changes cConfig format to JSON
* Cleaned up code

* Removed rated power (not used anymore)
* Removed rated engine speed form engine file. Now calculated form vfld file.

* Bugfix: Eco Roll didn't go into motoring operation when Overspeed-Limit was reached (could cause higher FC than Overspeed Mode)
* Minor update in demo data (12t motoring curve)
* Cleared up Demo Data
* Small fix in User Manual

* Add LICENSE.txt file.
* Add lic-header in all .vb files.
* Add python script for adding lic-headers.
* Add lic-header also in a powershell-script.

- Speed reduction in smaller steps to get closer to full load curve (before speed was sometimes reduced too much and caused problem with gear shifting)
- Updates in demo data

- Torque converter update: rpms over rated speed are not allowed.
- Fixed Wheels inertia in Demo Data

- Bugfix: Gears using torque converter and transmission loss maps may cause invalid "out of engine operation range" errors
- Null values for FzISO will abort calculation

* Set ver for release from 1.4 --> 1.4.RC4,
* Updated Update Notes,
* DID NOT moved VECTO_LIC project's dir, in 'default' branch not belonging (yet:-) to the solution.

- Files can be converted in JSON format. Backup will be created.
- Option in Settings whether to use JSON format or not
- Finished load-dependent RRC

- JSON signature file

- fixed stoptime in cycles.... again
- stoptime errors will abort after finding all invalid stoptimes (not after the first one)
- TEST: New JSON format for VECTO files (.vecto). Old files compatible.

- restructured Demo / Default Data

- "zero" stop-times are no longer allowing in distance-based cycles
- bugfix: Stand-still at cycle end (distance-based) was ignored
- bugfix: Crashes when distance correction at end of cycle
- added default cycles to repo (TODO: default input files)
- added Update Notes to repo

- <DRAG> keyword in Engine Only mode enabled
- variable gear number / TC possible in multiple gears
- transmission loss approximation for PreRun and Gear Shift Model

- Same job file list for BATCH and STANDARD
- FC extrapolation will not abort calculation. Invalid FC values are marked in output as "ERROR".
- Bugfix: FC interpolation failed when load points matched map points exactly.
- Bugfix: Invalid "FC= -10000!" errors when outside of FC-Map
- Updates in torque converter IN DEVELOPMENT
- No abortion if transmission output and input torque have different signs (In>0, Out<0)
- Updated modal results header
- New parameters in modal results (see changelog)
- Bugfix: Error if Look-Ahead Coasting was disabled.
- Eco-Roll revised (see changelog)
- Removed "IgnoreFCextrapol" form DEV-Options

- Fixed error in power calculation (rotatory part of acceleration force)
- Updated changelog.html

- Fixed assembly information
- Removed duplicate icon form User Manual
- updated readme.txt

- Updated Quick Start Guide
- New Welcome Dialog
- Updated Demo Data
- Update Notes and Support links in Help Menu of Mainform

- New parameters in .vecto file (F_GEN, cGEN Update)
- Minor updates in .gbx editor
- Some file-specific error messages link to files
- More exact Distance Correction

- bugfix: Wrong default settings in Gearbox Editor
- Default user-defined open command is now "notepad"

- Start/Stop implemented
- Fixed delaunay error
- Started Overspeed-Implementation (in dev.)

check changlelog.txt