Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1525-pcc-preprocessing to develop

* commit '792138f1':
  pcc segment preprocessor: update targetspeed also in case of non-highway sections to avoid that pcc sections reach into parts without highway
  adding testcase for pcc segment preprocessing where a pcc segment starts shortly after standstill

pcc segment preprocessor: update targetspeed also in case of non-highway sections to avoid that pcc sections reach into parts without highway

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1520-077.2457-p2-crashing-at-takeoff to develop

* commit 'feb1e8f5':
  adapt creating electric motor power map: when selecting the first grid-point of motor speeds in the power map, allow certain tolerances. apply clustering of speed entries, use distance between clusters to select min-speed grid point so that the map can be fully extended to 0 rpm. if the min/max torque at 0 rpm are lower/higher than the min/max values at the lowest rpm grid point, add entries at 0 rpm with the original torque values and extrapolate the electric power from the last 4 entries of the respective side of the map this is necessary to avoid extrapolations of the power map and thus simulation aborts

when selecting the first grid-point of motor speeds in the power map, allow certain tolerances. apply clustering of speed entries, use distance between clusters to select min-speed grid point so that the map can be fully extended to 0 rpm.
if the min/max torque at 0 rpm are lower/higher than the min/max values at the lowest rpm grid point, add entries at 0 rpm with the original torque values and extrapolate the electric power from the last 4 entries of the respective side of the map
this is necessary to avoid extrapolations of the power map and thus simulation aborts

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1519-077.2457-e2-gear-oscillation to develop

* commit '0d83ad6b':
  shiftstrategy E2: do not downshift if operating point in lower gear is too high for electric motor
  update version number
  update release notes
  Hybrid strategy: fix in calculating target speed for braking
  correcting typo in user manual

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:develop to develop

* commit 'cd60116d':
  Test Updates: added assertions (exceptions, and inconclusives) and included missing files
  Set some tests for Engineering XML to Inconclusive

Pull request #144: GUI: enable input for hybrid stategy parameters only for hybrid vehicles in engineering mode

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1516-gui-pev-vehicle-disable-hybrid-parameters to develop

* commit '473ab685':
  GUI: enable input for hybrid stategy parameters only for hybrid vehicles in engineering mode

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:bugfix/VECTO-1515-output-in-vsum-file to develop

* commit '5c17fd09':
  remove internal testcase
  remove splitting string for alternator type in .vsum file

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:develop to develop

* commit 'f35b5742':
  renamed testcase
  VECTO-1493 Testcase for P1+PCC+ESS (comparison on and off) TestP1ESS_ICEOnICEOff

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:develop to develop

* commit '5f5dc154':
  bugfix writing fuel type in sum container
  sum-data contains wrong output for fuel type (class name of iterator) instead of fuel string. add to testcase

sum-data contains wrong output for fuel type (class name of iterator) instead of fuel string. add to testcase

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Pull request #140: Added missing files for tests again (TestFullCycleModDataIntegrityDecl_P1ESS, and TestFullCycleModDataIntegrityDeclESS)

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:develop to develop

* commit '3214e0fd':
  Added missing files for tests again (TestFullCycleModDataIntegrityDecl_P1ESS, and TestFullCycleModDataIntegrityDeclESS)

Added missing files for tests again (TestFullCycleModDataIntegrityDecl_P1ESS, and TestFullCycleModDataIntegrityDeclESS)

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:bugfixing-20211220 to develop

* commit '78db2cb7':
  PowertrainBuilder DummyEngineInfo CombustionEngineOn: Set default again to false (was wrongly reverted in 6529a9e5)
  ADAS HEV PCC Tests updated
  New Test VECTO-1493 for testing P1 Citybus (didn't run through before)
  HybridStrategy: corrected AllowICEoff bug (added special case for P1+PCC+ESS)

PowertrainBuilder DummyEngineInfo CombustionEngineOn: Set default again to false (was wrongly reverted in 6529a9e5)

Merge in VECTO/vecto-dev from VECTO/mq_vecto-dev:develop to develop

* commit '553d37a2':
  adapt PCC tests due to different gearshift behavior (the HEV jobs still used the 'old' AMT shift logic to compute the shift polygons)
  working on release notes
  correcting error in user manual
  started working on release notes

adapt PCC tests due to different gearshift behavior (the HEV jobs still used the 'old' AMT shift logic to compute the shift polygons)

Merge branch 'develop' of https://citnet.tech.ec.europa.eu/CITnet/stash/scm/vecto/mq_vecto-dev into develop

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:feature/VECTO-1460-apt-n-gearbox to develop

* commit '7d74524a': (25 commits)
  APTNGearbox: removed unnecessary code.
  Added Case for APTN for ResponseUnderload in DrivingActionBrake to try again searching a suitable braking power.
  implemented overrides in APTN for easier debugging
  Interpolate2D: removed stopwatch
  Added that HybridStrategy does not use VelocityDropData if its not valid (like in APT-N gearboxes: they have no traction interruption)
  Improved check for APT-N Gearbox when used in SimplePowertrain
  code formatting
  PowertrainBuilder.GetShiftStrategy: Check for JobType for APTN Shift Strategy
  refactored return of Gearbox.Request for easier debugging
  reformated code for easier debugging
  added APTN in PowertrainBuilder.GetGearBox
  minor refactoring for readability
  GearboxType formatted Names of GearboxType Enum
  GearboxForm: APT-N only visible in Engineering Mode
  Added APTN in Powertrainbuilder.GetShiftStrategy again (was missing after merge)
  updated Gearbox GUI Editor (gearboxtype width)
  removed debug output
  updated APTNGearbox
  bugfix: ICE-EngineInfo for PEVs was null
  APTN Gearbox now directly derived from Gearbox
  ...

Michael KRISPER authored 3 years ago and Markus Quaritsch committed 3 years ago

Merge in VECTO/vecto-dev from VECTO/mk_vecto-dev:feature/VECTO-1493-use-enginestartstop-in-pcc-events-for-hybrid-p1 to develop

* commit 'cb3f7a14':
  HybridStrategy: Added special case for HybridP1 with EngineStopStart during PCC Events
  DefaultDriverStrategy: inlined dataBus variable
  code formatting
  formatting
  if EngineStopStart is active the ICE can be turned off also for HybridP1. For all others it can be turned of regardless of EngineStopStart Flag.
  reverted HybridStrategy to original state before changes of EngineStart (changes did not have any effect)
  Hybrid P1 when braking: changed condition from EngineInfo.EngineOn to iceOn variable
  changed check for start engine from Gearbox.Out to Gearbox.In