* commit 'c7b0fcd8':
  * Handling of time steps where coordinates are constant over a certain time period (GPS accuracy issue) set gradient to 0 to avoid division by zero * Allow also non-continuous input data in *.csdat files
  * Direct start option included * Anemometer instrument calibration removed from CSE calculation * Update of definition of beta-signal (180° = air flow from front)
  * Acceleration correction true as default
  * Acceleration correction true as default
  * Control if heading and given direction is always the same * set criteria to "standard" when CSE opens * store information when switching between tabs * ResetCriteria and ImportCriteria do not clear main tab

* Handling of time steps where coordinates are constant over a certain time period (GPS accuracy issue) set gradient to 0 to avoid division by zero
* Allow also non-continuous input data in *.csdat files

* Anemometer instrument calibration removed from CSE calculation
* Update of definition of beta-signal (180° = air flow from front)

* set criteria to "standard" when CSE opens
* store information when switching between tabs
* ResetCriteria and ImportCriteria do not clear main tab

* commit 'ef30cf3b':
  * Bugfix linear regression calculation LS   * Add control for beta angle <= 360° and calculation to +-180° if angle > +-180°   * Update user manual   * New Version number.
  Revert "  * Correction HS calculation"
  * Correction HS calculation   * Correction length calculation for the first section in the dat-file when there is a gap between the first and second MS.   * Update length calculation in csms-file to check if specified length from user and coordinates are the same   * New Version number.

  * Add control for beta angle <= 360° and calculation to +-180° if angle > +-180°
  * Update user manual
  * New Version number.

This reverts commit ac3d72cc.

  * Correction length calculation for the first section in the dat-file when there is a gap between the first and second MS.
  * Update length calculation in csms-file to check if specified length from user and coordinates are the same
  * New Version number.

* commit '55663825':
  * Correction HS calculation   * Correction length calculation for the first section in the dat-file when there is a gap between the first and second MS.   * Update length calculation in csms-file to check if specified length from user and coordinates are the same   * New Version number.

  * Correction length calculation for the first section in the dat-file when there is a gap between the first and second MS.
  * Update length calculation in csms-file to check if specified length from user and coordinates are the same
  * New Version number.

# By Raphael Luz
# Via Raphael Luz
* commit '5a8d2556':
  fake commit to sync tags

* commit '6ff704fd':
  Changes.md update

* commit 'a7dc84ed':
  * New Version number
  * Correction GenShape Check

* commit 'efa0dfd9':
  * New Version

* commit 'c2d7bc4a':
  * First Point of data reading corrected

# By ankostis@host:STUW025
# Via ankostis@host:STUW025
* commit 'd8ad31b5':
  Move gitignore manual out of folder to ease release.

* commit '4f566c93':
  Update Jobfile Actualise the User Manual

Actualise the User Manual

# By ankostis@host:STUW025
# Via ankostis@host:STUW025
* commit '8c89cad0':
  Add EUPL preamble on all source-files.
  Prepare for release, as v2.0.1-beta0

* Removed unused cResults class.
* Minor fix in logging-window.

* commit 'cb2c4f33':
  Correction of GenShape selection (JSON restructuring)
  Update Demo Jobfile
  Reset Result Values by calculations

* commit 'fb44087c':
  Add Results into Jobfile
  Update Jobfile
  Change *.csdat files into csv format (Delete units)