* VECTO input file generation added
* VECTO hashing added

* Validity criterias for calibration run extended (see technical annex)
* New calibration criterias (v_veh_1s_delta_CAL, v_veh_ave_delta_CAL)

* Add calculation results for CdxA(ß)_H1/2 and beta_H1/2 to result file
* Set gradient correction to false as default
* Update DemoData
* Update ReleaseNotes and UserManual

* Expand vehicle file with GVMMax value
* Displacement of Genshape file into code
* Add reference vehicle high in genshape class
* Add minimum/maximum vehicle high in genshape class
* Control of min/max height with vehicle height only in Declaration mode
* Change of CdxA(ß) and beta calculation
* Update UserManual and ReleaseNotes
* Delete Declaration-folder and GenShape-file
* Change of *_AirDrag.csv result-file

* Update Standard criteria values + renaming
* Including Declaration and Engineering Mode to Programm and Job-File
* Correction of digit tests for coordinates and altitude (Values in vehicle file changed to string values)
* Vehicle file check included (For height and class code in Declaration mode)
* Output files in Declaration mode extended
* New design of criteria tab
* Update Excel sheet

* Include of new variables for validity criteria (t_amb; t_ground; tq_grd)
* Deletion of [ss.ss] coordinate input
* Update criteria values
* Include of reference vehicle high in genshape file
* Expansion of the job-File due to new results
* Expand vehicle file with vVehMax value
* Check of digits after decimal seperator for all coordinates and transmission ratios (gear + axle)
* Update GUI due to new criteria values
* Option 2 result values deleted
* Output files adapted
* Calculation of new Result values (delta_CdxA_height; v_avg_LS/HS; t_amb_LS1)
* Update of Excel DemoData file

* Finalization altitude correction
* Fv_veh calculation update (now option 2 is the new preferred one) Option 2 is deleted from result file

* vehWidth and wheelsInertia deleted from vehicle-file
* Calculation of F_acc changed due to wheelsInertia deletion (now F_acc = 1.03*m*a)

* Bugfix calculation of a_veh_avg and omega_p_wh_acc
* Update of the calculation to allow day changes in the input data
* Update of the ending message if an error during the calculation was detected

* Add coordinate signals for [DD.DD] and [SS.SS] (User definition over header)
* Add individual list and decimal separators in preferences

  * Deleted unused variables (FC from input data, t_amb_tamac from criteria)
  * Add ground temperature as optional signal to input data (<t_ground>)
  * Add new criteria parameter t_ground_max = 40°C
  * Set t_amb_max to 25°C (old 35°C)

  * Delete valid_t_tire from output files and job-file
  * Change t_tire from required in input data to optional (like p_tire)
  * Delete rho_air_ref from criteria and GUI
  * Update release notes

  * Update user manual
  * Input "Report bug" button (at the moment this does nothing)

  * Update region and language settings: now it is regardless of the system which settings are used ! But the file definitions are still the same
  * Update of the excel makro in terms of the system region and language settings

* Add the Excel-makro to generate the input data into the DemoData files

* Output folder will be now created automatically if it´s not existing without questioning
* Welcome form added for first application start

* Update F_acc calculation

* Update calculation with cardan speed: Calculation only if engine speed is not given an automated transmission is used

--> Update of the vehicle file

* Update of calibration of vehicle speed and anemometer speed (high speed test instead of "claibration test")

* Update GenShape File

* Anemometer instrument calibration removed from CSE calculation
* Update of definition of beta-signal (180° = air flow from front)

* set criteria to "standard" when CSE opens
* store information when switching between tabs
* ResetCriteria and ImportCriteria do not clear main tab

* Remove unused distVincenty() func.

* GUI: Set AboutBox to display version, move create-activation-code menu-item into tools.
* Restored result-files from running of the demo-data.
* Updated changes.

* GUI: Show wait-cursor for all Form when calculating.

* Changed comment symbol in declaration_public

* UI: Add InfoBox also for Job-fields (MainTab, no FileManu.
* main-form: Restruct AsynJob &  UIPopulate regions above,
* Read GenShape with exceptions.
* UI, log, async: Do not clear logMsg before starting async.
* json: Homogenize schema opt-arg "isStrict".