<td>Altitude difference between start and end of cycle</td>
</tr>
<tr class="odd">
<tr class="even">
<td>FC-Map</td>
<td>[g/h], [g/km]</td>
<td>Average fuel consumption before all corrections, interpolated from <a href="#fuel-consumption-calculation">Fuel Map</a>, based on torque and engine speed.</td>
</tr>
<tr class="even">
<tr class="odd">
<td>FC-AUXc</td>
<td>[g/h], [g/km]</td>
<td>Average fuel consumption after <a href="#fuel-consumption-calculation">Auxiliary-Start/Stop Correction</a> (Based on FC-Map)</td>
</tr>
<tr class="odd">
<tr class="even">
<td>FC-WHTCc</td>
<td>[g/h], [g/km]</td>
<td>Average fuel consumption after <a href="#fuel-consumption-calculation">WHTC Correction</a> (Based on FC-AUXc)</td>
</tr>
<tr class="even">
<tr class="odd">
<td>FC-AAUX</td>
<td>[g/h], [g/km]</td>
<td>Average fuel consumption after Smart Auxiliary Correction (<em>still in development</em>) (Based on FC-WHTCc)</td>
<td>Final average fuel consumption after ALL corrections. Value for calculation of CO<sub>2</sub> value. If Loading = 0[kg] the column [l/100tkm] is left empty.</td>
</tr>
<tr class="even">
<tr class="odd">
<td>CO2</td>
<td>[g/km], [g/tkm]</td>
<td>[g/km], [g/tkm], [g/m^3km]</td>
<td>Average CO<sub>2</sub> emissions (based on FC-Final value). Output for [l/100tkm] is empty when Loading = 0[kg].</td>
</tr>
<tr class="odd">
<tr class="even">
<td>P_wheel_in_pos</td>
<td>[kW]</td>
<td>Average positive power at the wheels</td>
</tr>
<tr class="odd">
<td>P_fcmap_pos</td>
<td>[kW]</td>
<td>Average positive power at engine (all non-negative values averaged over the whole cycle duration)</td>
<li>[VECTO-405] Adding clutch-losses for AMT/MT gearboxes during drive-off, reduce drive-off distance after stop from 1m to 0.25m, set clutch closing speed (normalized) to 6.5%, changes in clutch model</li>
<li>[VECTO-379] Make GUI more tolerant against missing files. Instead of aborting reading the input data the GUI shows a suffix for missing input files</li>
<li>[VECTO-411] Allow a traction interruption of 0s for AMT/MT gearboxes</li>
<li>[VECTO-408] Gearbox Inertia for AT gearboxes set to 0</li>
<li>[VECTO-419] Adapted error messages, added list of errors</li>
<li>[VECTO-421,VECTO-439] Added volume-related results to vsum file (volume is computed based on default bodies)</li>
<li>[] Energy balance (vsum) and balance of engine power output and power consumers (vmod) level</li>
<li>[VECTO-430] AT shift strategy: upshifts may happen too early</li>
<li>[VECTO-431] AMT shift strategy always started in first gear due to changes in clutch model</li>
<li>[VECTO-433] adapt generic vehicles: use typical WHTC correction factors</li>
<li>[VECTO-437] set vehicle speed at clutch-closed to 1.3 m/s</li>
<li>[VECTO-436] fix simulation aborts with AT gearbox (neg. braking power, unexpected response, underload)</li>
</ul></li>
<li>Bugfixes:
<ul>
<li>[VECTO-415] Powershift Losses were not considered for AT gearboxes with PowerSplit</li>
<li>[VECTO-416] Measured Speed with gear failed when cycle contained parts with eco-roll (computation of next gear failed)</li>
<li>[VECTO-428] Sum of timeshares adds up to 100%</li>
<li>[VECTO-429] Min Velocity for lookahead coasting was not written to JSON file</li>
