- Small update in TC model

- Release Notes updated
- User Manual updated
- Generic Vehicles updated

- "DEV" tab is now "Test" tab

- Bugfix: Format error in .vmod header
- Update in Pwheel-Input

* DEV Tab permanently enabled!
* TClimit in DEV tab
* Removed unused DEV parameters

* Bugfix: Minimizing Graph window caused crash

- Bugfix: VECTO didn't check if the full load curve covers the range up to nhi. Now it will abort if the full load curve is "too short"
- Update in Torque Convert model: Allowed engine speed range up to n95h (before: Pmax-speed)

* Warning when opening or running files if file was created in different mode (Declaration/Engineering Mode)
* New Decl./Eng. Mode switch
* Small fixes

* Added Developer Guide (including picture source)

* Implemented engine-side TC inertia input parameter in GBX file
* Updated User Manual for TC inertia
* Relabeled "OK" buttons to "Save" in input file editors

* Updated Segment Table header
* Fixed Eco Roll (VECTO-30)
* Fixed Cycles in VECTO Editor being overwritten in Engineering Mode (VECTO-31)

readme: Update Release-checklist
BUG: Minor, sample Coach-file fails: Generic Vehicles\Engineering Mode\24t Coach\24t Coach.vecto

* Updated CSV file format. Now only one header with units included.
* Changed input file comment symbol form "c" to "#".
* Replaced old Demo/Default Data with "Demo Vehicles"
* Updated User Manual

* Removed pre-header from .vmod and .vsum files
* Updated Graph  for new .vmod format

* Mission profiles are shown in VECTO Editor in Declaration Mode
* Removed "Extrapolation not possible!" exceptions in cDelaunayMap for faster debugging
* Better Cd * A handling in GUI and input file

* Added EUPL headers to new source files
* Updated Declaration folder
* Moved GUI/report source files to new folder (outside Declaration folder)
* Fixed opening .vmod files in Graph from Message list

- Finished new visualizer

* Added pdf report output
* Added charts in files editors
* Added declaration mode features
* Removed GRAPHi calls
* Added visualizer for modal results (replaces GRAPHi)(open)
* Changes cConfig format to JSON
* Cleaned up code

* Removed rated power (not used anymore)
* Removed rated engine speed form engine file. Now calculated form vfld file.

* Target deceleration (.vacc file) doesn't work right if distance-steps in driving cycle are too large. Now limited to 1[m].
* Bugfix: When moving job files up or down in job list the "checked jobs" counter was incorrectly reduced.
* Bugfix: Vehicle Editor: "New file" had invalid axle configuration (caused crash when trying to edit).

* Add LICENSE.txt file.
* Add lic-header in all .vb files.
* Add python script for adding lic-headers.
* Add lic-header also in a powershell-script.

- Bugfix: Gears using torque converter and transmission loss maps may cause invalid "out of engine operation range" errors
- Null values for FzISO will abort calculation

- Added twin tyres option for load-dependent RRC
- bug fixes

- Update Notes updated (still open: File Signing)
- Load-dependent RRC finished

- Files can be converted in JSON format. Backup will be created.
- Option in Settings whether to use JSON format or not
- Finished load-dependent RRC

- JSON signature file

- fixed stoptime in cycles.... again
- stoptime errors will abort after finding all invalid stoptimes (not after the first one)
- TEST: New JSON format for VECTO files (.vecto). Old files compatible.

- restructured Demo / Default Data

- "zero" stop-times are no longer allowing in distance-based cycles
- bugfix: Stand-still at cycle end (distance-based) was ignored
- bugfix: Crashes when distance correction at end of cycle
- added default cycles to repo (TODO: default input files)
- added Update Notes to repo

- When speed is under 5km/h and engine in motoring operating then gearbox shifts to Neutral
- "Minimum (actual) speed" instead of "Min. Target Speed" (Eco-Roll, Overspeed, Look Ahead Coasting)

- <DRAG> keyword in Engine Only mode enabled
- variable gear number / TC possible in multiple gears
- transmission loss approximation for PreRun and Gear Shift Model

- Same job file list for BATCH and STANDARD
- FC extrapolation will not abort calculation. Invalid FC values are marked in output as "ERROR".
- Bugfix: FC interpolation failed when load points matched map points exactly.
- Bugfix: Invalid "FC= -10000!" errors when outside of FC-Map
- Updates in torque converter IN DEVELOPMENT
- No abortion if transmission output and input torque have different signs (In>0, Out<0)
- Updated modal results header
- New parameters in modal results (see changelog)
- Bugfix: Error if Look-Ahead Coasting was disabled.
- Eco-Roll revised (see changelog)
- Removed "IgnoreFCextrapol" form DEV-Options

- Changed "Retarder" to "Retarder Losses" in Vehicle Editor to avoid misunderstandings

- Updated Quick Start Guide
- New Welcome Dialog
- Updated Demo Data
- Update Notes and Support links in Help Menu of Mainform

- Added PicCoordLogger.exe (for User Manual development)
- Updated Tabindices for F_GEN controls
- Disabled distance correction for coasting to avoid engine leaving coasting operation