Newer
Older
VECTO-CSE: Changes
===================
Martin Dippold
committed
#### 2016-11-25: v3.0.1 ####
TUG improvements:
* New version number
* Bugfix for digit check by use of GPS
#### 2016-11-16: v3.0.0 ####
TUG improvements:
* New version number
Martin Dippold
committed
* Update of needed signals in calibration run (t_ground no longer required as input)
* A license valid until 16th of March is distributed with the code.
* Update DEMOData
#### 2016-11-09: v2.0.7-beta8/9 ####
TUG improvements:
* Correction of rolling resistance criteria
* Correction of digit test for coordinates
TUG improvements:
* New version number
* Including Declaration and Engineering Mode to program and Job-File
* Fv_veh calculation update (now option 2 is the new preferred one) Option 2 is deleted from result file
* Uneven numbers of datasets per heading in HS test now allowed
* Calculation of F_acc changed due to wheels inertia deletion (now F_acc = 1.03*m*a)
* New design of criteria tab
* Update Standard criteria values + renaming
* Include of new variables for validity criteria (t_amb; t_ground; tq_grd)
* gradient correction implemented
* Check of digits after decimal separator for all coordinates, transmission ratios (gear + axle) and altitudes (Values in vehicle file changed to string values)
* Vehicle file check included (For height and class code)
* Expand vehicle file with vVehMax and GVMMax value
Martin Dippold
committed
* Change vehicle file configuration parameter from "Rigid/Tractor" to "No/Yes"
* Displacement of Genshape file into code
* Add reference vehicle high in genshape class
* Add minimum/maximum vehicle high in genshape class
* Control of min/max height with vehicle height only in Declaration mode
Martin Dippold
committed
* Calculation of new Result values (delta_CdxA_height; v_avg_LS/HS; t_amb_LS1, CdxA(ß)_H1/2, beta_H1/2)
* Output files in Declaration mode extended
* Output files adapted
* Expansion of the job-File due to new results
* vehWidth and wheelsInertia deleted from vehicle-file
* Deletion of unused variables (omega_wh; omega_wh_acc; omega_p_wh_acc; t_tire; p_tire; ...)
* Deletion of [ss.ss] coordinate input
* Update DEMOData
* Update of Excel DemoData file
* Update user manual and release notes
#### 2016-01-21: v2.0.6-beta6 ####
TUG improvements:
* New version number
* Bugfix control heading calculation in *.csms file
* Bugfix old functions for day changes deleted
* Update user manual and release notes
#### 2015-11-25: v2.0.5-beta6 ####
TUG improvements:
* New version number
* Renaiming of VECTO-CSE into VECTO-Air Drag
* Bugfix dist calculation
* Bugfix calculation of a_veh_avg and omega_p_wh_acc
* Update of the ending message if an error during the calculation detected
* Update user manual and release notes
TUG improvements:
* New version number
* Updates by error/warning output
* Update user manual and release notes
* Free definition for list and decimal separators in the CSV-Files
* Variable definition of the coordinate unit (*.csms and *.csdat files)
* Update of the excel file
TUG improvements:
* New version number
* Bugfix calculation without additional signals
* Update user manual and release notes (Now always the newest version will be opened)
* Deleted unused variables (FC from input data, t_amb_tamac from criteria)
* Add ground temperature as optional signal to input data (<t_ground>)
* Add new criteria parameter t_ground_max = 40°C
* Set t_amb_max to 25°C (old 35°C)
#### 2015-07-20: v2.0.2-beta6 ####
TUG improvements:
* Bugfix heading control
* Update user manual
* Add "Report bug" option
* Add JIRA Quick Start Guide
* Delete valid_t_tire from output files and job-file
* Change t_tire from required input data to optional (like p_tire)
* Delete rho_air_ref from criteria and GUI
TUG improvements:
* New Version number.
* Update region and language settings: now it is regardless of the system which settings are used ! But the file definitions are still the same
* Update of the excel makro in terms of the system region and language settings
#### 2015-06-24: v2.0.2-beta5 ####
Mostly TUG improvements:
* FIX Job-save missing criteria (hack)
* Update of calculation of the CdxA value from measured drag forces
* Update GenShape File
* Update of calibration of vehicle speed and anemometer speed (high speed test instead of "claibration test")
* new criteria delta_n_eng for LS/HS included
* Option in VECTO-CSE to read in cardan speed instead of engine speed and gear ratios for HS and LS
--> Update of the vehicle file
* Update calculation with cardan speed: Calculation only if engine speed is not given an automated transmission is used
* Program user friendly updates
* Update F_acc calculation
* Update r_dyn calculation for each test (HS, LS1, LS2)
* Update DemoData
* Update user manual and release notes
* Output folder will be now created automatically if it´s not existing without questioning
* Welcome form added for first application start
* Correction of welcome window
* Add the Excel-makro to generate the input data into the DemoData files
* New Version number.
#### 2015-05-21: v2.0.1-beta5 ####
* Handling of time steps where coordinates are constant over a certain time period (GPS accuracy issue) set gradient to 0 to avoid division by zero
* Allow also non-continuous input data in *.csdat files
* Direct start option included
* Anemometer instrument calibration removed from CSE calculation
* Update of definition of beta-signal (180° = air flow from front)
* Acceleration correction: true as default
* Control if heading and given direction is always the same
* set criteria to "standard" when CSE opens
* store information when switching between tabs
* ResetCriteria and ImportCriteria do not clear main tab
* New Version number.
#### 2014-11-13: v2.0.1-beta4 ####
* Bugfix linear regression calculation LS
* Add control for beta angle <= 360° and calculation to +-180° if angle > +-180°
* Update user manual
* New Version number.
#### 2014-11-10: v2.0.1-beta3 ####
* Correction HS calculation
* Correction length calculation for the first section in the dat-file when there is a gap between the first and second MS.
* Update length calculation in csms-file to check if specified length from user and coordinates are the same
* New Version number.
* Correction GenShape Check
* New Version number.
#### 2014-09-15: v2.0.1-beta1 ####
* IO: Data reading corrected for first data set in measurement section file, weather file and data files.
* New Version number.
--------------------
Mostly JRC contributions (see VECTO-29 & VECTO-35):
* IO: JSON-ize preferences, vehicle, job & criteria-files EXCEPT from Track-file.
* IO: CSVize all the rest files with a single header line and use '#' for comment lines.
* IO: Separate config/ from Declaration/ folders.
* UI: Provide default-values and help-messages in GUI/files with infos fetched from JSON-schemas.
* UI: Make the Log-window visible at all times (more necessary now that unhandled exceptions are appropriately reported).
* Log: Gather all unhandled exceptions and report them into log-window and log-file.
* Log: Improving error-reporting by including stack-traces and timestamps into the log-file, for post-mortem examination.
* Translate all file-paths against `Prefs.WorkingDir`, so that i.e. Job-files can be ported to other computers.
* Possible to specify any editor (not only notepad.exe) for viewing files.
* Standarize versioning using [SemanticVersioning](http://semver.org/).
* Welcome developers and users with README.md, CHANGES.md and COPYING.txt files.
##### Internal:
* Implement an API for writing Header/Body json-files.
* Apply Object-oriented design weith resource-management when I/O files.
* Sporadic fixes to work with filenames having 2-part extensions (ie `some_file.csjob.json`).
Kostis ANAGNOSTOPOULOS
committed
* Log: Improve logging-API so now a single log-routine is used everywhere(instead of 3 different ones).
* async: Stop abusing worker-Thread with Globals, use DoWorkEventArgs instead.
Kostis ANAGNOSTOPOULOS
committed
* async: Start using Exceptions instead of CancelAsync() and error-flags.
* General restructuring of the folders and names in the project.
More analytically:
#### 2014-06-23: v2.0.1-beta0 ####
Mostly TUG improvements:
* json: Store run-results within the Job-file.
* csv: Ensure result-files are valid CSVs.
* csv: Changed comment symbol in CSV files from 'c' --> '#'
* csv: Unify hunits into header labels.
##### Internal:
Kostis ANAGNOSTOPOULOS
committed
* Use Exceptions instead of CancelAsync() and error-flags in calc-routines and input.vb.
* Remove unused distVincenty() func.
* Added EUPL preamble on all source-files.
#### 2014-06-04: v2.0.1-pre2 ####
JRC contributions:
* Convert Job & Criteria files to JSON and possible to store them separately.
* Still supporting old format for reading.
* Use Use WorkingDir trick for all job-file paths, so that Job-files can be ported to other computers.
* UI: Make the Log-window visible at all times (more necessary now that unhandled exceptions are appropriately reported).
* UI: Setup criteria-infobox from JSON-schema.
##### Internal:
* Log unhandled exceptions.
* Gather all infos related to Job-properties (type, description, units) in a single place, the JSON-schema for the job-file.
Kostis ANAGNOSTOPOULOS
committed
* async: Stop abusing worker-Thread with Globals, use DoWorkEventArgs instead.
* Sporadic fixes to work with filenames having 2-part extensions (ie `some_file.csjob.json`).
* More refactorings to simplify structure of source files and folders.
#### 2014-05-30: v2.0.1-pre1 ####
JRC contributions:
* Read/write Vehicle-file as JSON.
* prefsUI: Add Reload button.
* Remember window-location (use .net Settings for that).
* All logs (even those sent to msg-box) are written to log-file, with timestamps and stack-traces.
##### Internal:
* Start saving stack-traces into the log-file.
* Enhance JSON-files with standard header/body behavior.
* Link JSON to GUI controls (labels & toolstips)
* json: Read defaults from schemas.
* Rework logging as a single routine, whether invoked from Background Worker or not.
#### 2014-05-23: v2.0.1-pre0 ####
JRC contributions:
* Separate config/ from Declaration/ folders.
* Remove the versioning infos from app-name (manual, project-name, folders) and
use [SemanticVersioning](http://semver.org/) 2.0.0 instead.
* Possible to use any editor (not only notepad.exe).
* Added README.md, CHANGES.md, COPYING.txt files.
##### Internal:
* Auto create config/ on the 1st run, converted to JSON with transparent error-handling.
* FIX leaking of file-descriptors by using VB's 'Using' statement (class 'cFile_v3' now implements IDisposeable).
#### 2014-05-14: CSE2.01 ####
1st delivery from TU-Graz under Lot-3.