Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:bugfix/VECTO-1658-xml-export-for-dual-fuel-don-t-work-properly to develop

* commit '2ba0e761':
  disable exporting jobs as XML as the XML for e.g. dual fuel or WHR engines requires new XML version

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:develop to develop

* commit 'c32152f7':
  adding missing file

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:bugfix/VECTO-1655-not-possible-to-set-tank-sytem-to-liquefied-chagnes-it-back-to-compressed-in-.vveh to develop

* commit '686380b2':
  bugfix reading JSON Vehicle file: ng tank system no read correctly

Pull request #911: in case the ICE was off in the previous simulation step, calcuclate the average speed as if the engine was on (no ramp-up is simulated, engine start is considered in postprocessing)

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:bugfix/VECTO-1656-simulation-run-aborted to develop

* commit '419e6417':
  in case the ICE was off in the previous simulation step, calcuclate the average speed as if the engine was on (no ramp-up is simulated, engine start is considered in postprocessing)

in case the ICE was off in the previous simulation step, calcuclate the average speed as if the engine was on (no ramp-up is simulated, engine start is considered in postprocessing)

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:feature/VECTO-1647-update-user-manual to develop

* commit 'abd98fea':
  correcting user manual on PCC and dual fuel

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:VECTO-1643-error-gear-6l-lossmap-data-was-extrapolated-in-declaration-mode to develop

* commit 'adb7aeb0':
  DriverStrategy: additional criteria for switching from coasting to braking. in case the braking phase is very short (smaller than half of the lower-bound simulation time interval), immediately switch to braking

DriverStrategy: additional criteria for switching from coasting to braking. in case the braking phase is very short (smaller than half of the lower-bound simulation time interval), immediately switch to braking

Merge in VECTO/vecto-sim from master to develop

* commit 'c21d3781':
  updating changelog, release notes adding release checklist and results
  update expected file in testcase to latest file version
  Bugfix saving VECTO Job (vehicle): use file version 9 to correctly write/read APTEcoRoll flag

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:master to master

* commit 'dca3ca17':
  updating changelog, release notes adding release checklist and results
  update expected file in testcase to latest file version

adding release checklist and results

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:develop to master

* commit 'd4af5fc1':
  Bugfix saving VECTO Job (vehicle): use file version 9 to correctly write/read APTEcoRoll flag
  Bugfix saving VECTO Job (vehicle): use file version 9 to correctly write/read APTEcoRoll flag

Merge branch 'develop' of https://citnet.tech.ec.europa.eu/CITnet/stash/scm/vecto/mq_vecto-sim into develop

Pull request #903: Bugfix saving VECTO Job (vehicle): use file version 9 to correctly write/read APTEcoRoll flag

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:bugfix/VECTO-1635-reading-writing-the-adas-parameter-atecorollreleaselockupclutch-does-not-work to develop

* commit '106abe91':
  Bugfix saving VECTO Job (vehicle): use file version 9 to correctly write/read APTEcoRoll flag

Merge in VECTO/vecto-sim from develop to master

* commit 'd9ad3dee': (32 commits)
  bugfix: add missing parameter in interface for factory method, uploading release report, results
  updating changelog and release notes
  update expected values in testcase after bugfix for VECTO-1615
  adding files to project
  bugfix writing CIF/MRF for exempted vehicles, updating monitoring XML
  adding gyre version 2.3
  AuxWriteModFileSumFile Test: corrected path (missing "MockFile")
  DataAdapter: Corrected errors when the limits are not defined (null)
  Testfiles added to project
  TorqueLimitTest: Added testcases for disabled gears (some valid and some invalid configurations)
  EngineeringDataAdapter: Implemented disabling gears VECTO-1628
  Added Files for TestCases VECTO-1628
  DeclarationDataAdapter: implemented filter logic for disabling the upper gears with TorqueLimits
  DeclarationInputData: Added comment for TorqueLimits with Parameternumber
  VECTO-1615 and VECTO-1616: Braking ended in vehiclespeed being slightly below TargetSpeed. Added Tolerance of 0.1 km/h
  adding missing files: testdata for hashing components defined in schema version 2.3
  adding sample vehicles for DF and WHR
  adding code for reading engine data version 2.3 (DF, WHR), adapting MRF and CIF to contain DF results, whr info
  updating XML Schema for CIF/MRF to be ready for WHR and DF
  adding caching dictionary for modal data fields
  ...

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:develop to develop

* commit 'f5ca793a':
  bugfix: add missing parameter in interface for factory method, uploading release report, results
  updating changelog and release notes

uploading release report, results

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:develop to develop

* commit 'cc8aa745':
  update expected values in testcase after bugfix for VECTO-1615

Merge branch 'develop' of https://citnet.tech.ec.europa.eu/CITnet/stash/scm/vecto/mq_vecto-sim into develop

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:feature/VECTO-1585-validate-component-hashes-in-declaration-mode to develop

* commit 'a7aa1bb5':
  by default, disable xml hash validation of input
  disable xml hash validation in tests
  update hashes in test jobs
  adding option in gui to turn on/off hash validation
  add option to validate hashes of components in declaration job

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:develop to develop

* commit '2efe5136':
  adding files to project

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:VECTO-1619-adaptations-of-xml-results-in-transition-period to develop

* commit '6551287c':
  bugfix writing CIF/MRF for exempted vehicles, updating monitoring XML

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:VECTO-1619-adaptations-of-xml-results-in-transition-period to develop

* commit '3dbe2c58':
  adding gyre version 2.3

Merge in VECTO/vecto-sim from VECTO/mq_vecto-sim:VECTO-1619-adaptations-of-xml-results-in-transition-period to develop

* commit 'a1cee17c':
  adding missing files: testdata for hashing components defined in schema version 2.3
  adding sample vehicles for DF and WHR
  adding code for reading engine data version 2.3 (DF, WHR), adapting MRF and CIF to contain DF results, whr info
  updating XML Schema for CIF/MRF to be ready for WHR and DF

Merge in VECTO/vecto-sim from feature/VECTO-1628-gear-disabling to develop

* commit 'b1fbc513':
  DataAdapter: Corrected errors when the limits are not defined (null)
  Testfiles added to project
  TorqueLimitTest: Added testcases for disabled gears (some valid and some invalid configurations)
  EngineeringDataAdapter: Implemented disabling gears VECTO-1628
  Added Files for TestCases VECTO-1628
  DeclarationDataAdapter: implemented filter logic for disabling the upper gears with TorqueLimits
  DeclarationInputData: Added comment for TorqueLimits with Parameternumber

Pull request #895: VECTO-1615 and VECTO-1616: Braking ended in vehiclespeed being slightly below TargetSpeed.

Merge in VECTO/vecto-sim from VECTO-1615 to develop

* commit '048e8010':
  VECTO-1615 and VECTO-1616: Braking ended in vehiclespeed being slightly below TargetSpeed. Added Tolerance of 0.1 km/h